HOME / Toilet Cleaner / Lysol power lime & rust remover toilet bowl cleaner
LYSOL Power Lime & Rust Remover Toilet Bowl Cleaner
LYSOL Power Lime & Rust Remover Toilet Bowl Cleaner
WHERE TO BUY
CATEGORY
Toilet CleanerBRAND
LYSOLDATA LAST UPDATED
September 10, 2012
Ingredient concerns
See how this product scores for common concerns.
Health Concerns
-
MODERATEAsthma / Respitory
-
HIGHSkin Allergies & Irritation
-
SOMEDevelopmental & Reproductive Toxicity
-
SOMECancer
-
LOWEnvironment
Ingredient scores
Ingredient Disclosure: good
Ingredients are scored based on their formulation and concentration in this product. Click on an ingredient for more information.
Ingredients from the label
ACTIVE INGREDIENTS: Hydrochloric acid 9.50%, OTHER INGREDIENTS: 90.50%, TOTAL: 100.00%
Directions from Packaging
TO OPEN CHILD RESISTANT CAP 1. Place fingers on marked cap ridges. 2. Squeeze cap firmly and turn counterclockwise until it stops. Do not remove cap. 3. To reseal, squeeze cap again and turn clockwise. DO NOT squeeze bottle when opening. DIRECTIONS FOR USE: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before using product. To Open Child Resistant Cap: Hold bottle firmly with one hand on a flat surface. With other hand, squeeze sides of cap where indicated while turning counterclockwise. Do not remove cap. Avoid squeezing bottle when opening. To reseal, twist cap clockwise until tightly closed. To Clean/Disinfect/Sanitize: 1. Flush first and remove excess dirt and grime before cleaning and disinfecting. 2. Wet all surfaces of bowl interior, including sides of bowl and under the rim, with at least 4 oz. of liquid. (Squeeze bottle approximately 15 seconds.) Do not close toilet bowl lid. 3. Disinfect: Let stand for at least 10 minutes. Sanitize: Let stand for 30 seconds. 4. Brush entire bowl thoroughly with a bowl brush and flush. 5. Rinse brush in fresh water after use. To Remove Tough Stains: Apply a generous amount of liquid directly onto the tough stains. For severe rust stains, if possible, remove water from bowl before applying liquid. Let soak for 15 minutes. DO NOT CLOSE TOILET BOWL LID. Brush entire bowl thoroughly with a bowl brush and flush. Rinse brush in fresh water after use. Repeat if necessary. Lysol brand disinfectant power toilet bowl cleaner with lime & rust remover has been specially formulated for use only in toilet bowls. It should not be used or placed on toilet bowl lids, vanities, sinks, bathtubs, cabinets, countertops, rugs, etc. Clean up spills and drips immediately.
Warnings
Do not use with chlorine bleach or any other chemical products. Will not harm plumbing or septic systems. PRECAUTIONARY STATEMENTS: Hazards to Humans and Domestic Animals. DANGER: CORROSIVE. Causes irreversible eye damage and skin burns. Harmful if swallowed. Do not get in eyes, on skin or on clothing. Wear protective eyewear [safety glasses/goggles], protective gloves and protective clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. Remove and wash contaminated clothing before reuse. Do not breathe vapor or fumes. Keep out of reach of children. Contains Hydrochloric Acid.
This product is not certified as a green cleaner.
EPA registered pesticide product
Pesticide products registered for use in the United States
Web: http://www.cdpr.ca.gov/docs/label/labelque.htm
Unknown:
Leading international certifiers PETA and Leaping Bunny have no information concerning this company’s use of animal testing.