RESOLVE High Traffic Foam

Ingredients from the label

Directions from Packaging

If accidentally sprayed on furniture, just wipe off. Before Cleaning: Vacuum thoroughly to remove loose dirt. Blot wet soils with a clean, absorbent cloth. If carpet is being cleaned for the first time, test a hidden area for colorfastness. Large Area Cleaning: Shake Can Well. Hold can upside down about 2 feet above carpet. Spray foam evenly over 3 foot square area. Work the foam into carpet in two directions using a damp, colorfast mop. Repeat steps 1 & 2 until the entire area is cleaned. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Self Cleaning: Shake Can Well before and during use. Hold can upside down about 2 feet above carpet. Spray lightly and evenly using a side to side sweeping motion - the carpet color should show through.Allow 15 minutes for the foam to loosen dirt and to dry. Drying time may vary with humidity and depth of carpet pile. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Spot & Stain Cleaning: Shake Can Well and generously apply directly to stain from a distance of 4 to 6-inches. Allow foam to absorb into stain for 3 minutes. Gentle rub or blot area with an absorbent, dry cloth. Repeat steps 1 and 2 as needed. When completely dry, vacuum to restore plushness. For Best Results:Use vacuum cleaner with a fresh, empty bag.

Warnings

Warnings: Keep out of reach of children. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F. Avoid freezing.