Ingredients from the label
What appears on the label: Active Ingredients: Triethylene Glycol (5.40%), Alkyl (50% C14, 40% C12, 10% C16) Dimethyl Benzyl Ammonium Chlorides (0.05%)Inactive Ingredients: Other Ingredients (94.55%)
Text from the label
As it appears in the database
Alkyl Dimethyl Benzyl Ammonium Chlorides
Warnings & Directions
Directions for Use:
It is a violation of Federal law to use this product in a manner inconsistent with it's labeling. To sanitize the air: Shake well before using. To temporarily reduce airborne odor-causing bacteria and eliminate odors, close all doors, windows and air vents. Hold can upright, press button and spray towards center of an average room (12'x12'x9') for 10 seconds. For maximum effectiveness, relative humidity should be between 45% and 70%. Resume normal room ventilation after spray has settled. repeat as necessary. For surface disinfection and sanitization: Preclean surfaces prior to use. Shake well before use. Hold can upright 6" to 8" from surface. Spray 2 to 3 seconds until covered with mist. To sanitize: Allow to stand for 5 minutes, then rinse thoroughly with potable water. To disinfect: Allow to stand for 10 minutes to air dry. To prevent mold & mildew on hard, non-porous surfaces: Pre-clean hard, non-porous surfaces. Shake well before each use. Hold can upright 6" to 8" from surface. Spray 2 to 3 seconds until covered with mist. Let surface remain wet for 10 minutes, allow to air dry. Repeat application at weekly intervals or when mold and mildew growth appears.
Caution:
Warnings: Precautionary Statements: Hazards to humans and domestic animals. Do not spray directly into eyes. First Aid: If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Physical Hazards: Contents under pressure. Do not use or store near heat or open flame. Do not puncture or incinerate container. Exposure to temperatures above 130 F may cause burning. Do not use on polished wood, painted surfaces, leather, rayon fabrics, or acrylic plastics. Rinse all surfaces that come in contact with food with potable water before reuse. Spray may leave hard floors slippery. Do not puncture or incinerate.
Animal Testing
Unknown:
Leading international certifiers PETA and Leaping Bunny have no information concerning this company’s use of animal testing.