HOME / General Purpose Bathroom Cleaner / Scrubbing bubbles antibacterial bathroom cleaner, fresh clean
Scrubbing Bubbles Antibacterial Bathroom Cleaner, Fresh Clean
Scrubbing Bubbles Antibacterial Bathroom Cleaner, Fresh Clean
WHERE TO BUY
CATEGORY
General Purpose Bathroom CleanerBRAND
Scrubbing BubblesDATA LAST UPDATED
September 10, 2012
Ingredient concerns
See how this product scores for common concerns.
Health Concerns
-
MODERATEAsthma / Respiratory
-
No DataSkin Allergies & Irritation
-
SOMEDevelopmental & Reproductive Toxicity
-
SOMECancer
-
SOMEEnvironment
Ingredient scores
Ingredient Disclosure: poor
Ingredients are scored based on their formulation and concentration in this product. Click on an ingredient for more information.
F |
ALKYL DIMETHYL BENZYL AMMONIUM CHLORIDES (C12-16)
|
|
||||
|
F |
BUTOXYDIGLYCOL
|
|
||||
|
C |
TETRASODIUM EDTA
|
|
||||
|
C |
ALKYL DIMETHYL ETHYLBENZYL AMMONIUM CHLORIDES (C12-18)
|
|
||||
|
C |
ALKYL DIMETHYL ETHYLBENZYL AMMONIUM CHLORIDE (C12-14)
|
|
||||
|
C |
ISOBUTANE
|
|
||||
|
A |
WATER
|
|
N ALKYL DIMETHYL ETHYLBENZYL AMMONIUM CHLORIDES
|
|
|||
|
Ingredients from the label
Active Ingredients: N Alkyl (60% C14, 30% C16, 5% C12, 5% C18) Dimethyl Benzyl Ammonium Chloride (0.11%), N Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides (0.11%) Inactive Ingredients: Inert Ingredients (99.78%)
Directions from Packaging
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Shake well before and during use. To Clean: Spray 6-8 inches from surface to be cleaned. Allow foam to penetrate soil. For heavily soiled areas, let stand several minutes before wiping. Remove by wiping with a wet cloth or sponge. No need to wipe dry. On chrome, rinse with water. Works from any angle! To Kill 99.9% of Bacteria: On hard non-porous surfaces, spray surface until thoroughly wet. Let stand for 1 minute. Then wipe. For heavily soiled areas a pre-cleaning is required. To Inhibit and Prevent the Growth of Mold and Mildew: Remove gross filth or heavy soil prior to applying the product for treatment against mold and mildew. On hard non-porous surfaces, spray surface until thoroughly wet. Let stand for 1 minute. Then wipe. Reapply as needed. Storage & Disposal: Storage: Store in a cool, dry place away from heat or flame. Disposal: This container may be recycled where aerosol can recycling is available. Before offering for recycling, empty can by using the product according to the label. Do not incinerate or puncture. If recycling is not available, discard empty container in trash.
Warnings
Precautionary Statements: Hazards to humans and domestic animals: Caution: Causes slight eye irritation. Avoid contact with eyes. Wash thoroughly with soap and water after handling. First Aid: If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. Physical or Chemical Hazards: Contents under pressure. Do not use or store near heat or open flame. Exposure to temperature above 130 deg F (54 deg C) may cause bursting. Do not puncture or incinerate container.
This product is not certified as a green cleaner.
EPA registered pesticide product
Pesticide products registered for use in the United States
Web: http://www.cdpr.ca.gov/docs/label/labelque.htm
Unknown:
Leading international certifiers PETA and Leaping Bunny have no information concerning this company’s use of animal testing.