Di(2-ethylhexyl) adipate
Easton Area Water System
Di(2-ethylhexyl) adipate is used in PVC plastic, plastic wrap and other consumer products. It is released as a pollutant from industrial sources and sewage treatment plants. In studies of laboratory animals, di(2-ethylhexyl) adipate can harm fetal development.
Samples
Samples exceeding legal limit (MCL)
Samples exceeding
health guidelines
Testing results - average by year
Year | Average result | Samples taken | Detections | Range of results |
---|---|---|---|---|
2013 | N/A | 0 | 0 | N/A |
2014 | ND | 2 | 0 | ND |
2015 | ND | 1 | 0 | ND |
2016 | N/A | 0 | 0 | N/A |
2017 | ND | 2 | 0 | ND |
2018 | N/A | 0 | 0 | N/A |
2019 | N/A | 0 | 0 | N/A |
ppb = parts per billion
State and national drinking water standards and health guidelines
EWG Health Guideline 200 ppb
The EWG Health Guideline of 200 ppb for di(2-ethylhexyl) adipate was defined by the California Office of Environmental Health Hazard Assessment as a public health goal, the level of a drinking water contaminant that does not pose a significant health risk. This health guideline protects against harm to internal organs.
EPA Maximum Contaminant
Level (MCL) 400 ppb
The legal limit for di(2-ethylhexyl) adipate, established in 1992, was based on a toxicity study in laboratory animals conducted in the 1980s.
ppb = parts per billion
All test results
Date | Lab ID | Result |
---|---|---|
2014-04-02 | 14030788-01 | ND |
2014-07-23 | 14030789-01 | ND |
2015-04-01 | 12670861 | ND |
2017-04-05 | 15990263 | ND |
2017-07-19 | 16617642 | ND |